PCM 48 channel multiplexer equipment (New Arrival)
1.4E1 48 channel +100M PCM multiplexer
2.FXS, FXO, hotline, magneto phone
3.Up to 4 NMS platforms
4. 4 ethernet and RJ45
Product Overview
FT-50A PCM 48 channel Multiplexer can be configured as PDH fiber/electrical integrator, 4E1 48 cross-connect channel PCM equipment or D/I device. The dual optical interfaces adopt hot backup.
Main Features | |
High Integration and Flexible Configuration | -Can be configured as PDH fiber/electrical integrator, 4E1 48 cross-connect channel PCM equipment or D/I device. |
-Dual fiber interfaces adopt hot backup. | |
-Master cards and power supply cards adopt hot redundant backup | |
-Up to 48 audio and data channels, E1 port can be 75Ohm or 120Ohm, multiple interfaces includes: FXS, FXO, hotline, magneto phone, 2100Hz carrier phone, 2 wire E/M, 4 wire E/M, telegraph, V.35, V.24/V.28, 64K, N×64K, Ethernet interface. | |
-Providing external clock input. | |
High Intelligence and Powerful Network Management System | -Can be configured in star or tree network according to users requirements. |
-Up to 4 NMS platforms can run simultaneously in the same network, and the NMS platform can be deployed in any node of the network. | |
-Operating status of local or remote devices can be detected anddisplayed through NMS. | |
-Convenient to set cross-connect mode, set the level of analog interface, read devices settings. | |
-Automatic online test function can realize level test and signaling test for analog interface, functional test for data interface, functional tests of A/B ground, short circuit for external lines. | |
High Reliability | -Advanced circuit design, modular structure. |
-Adopting low power consumption, high reliable components | |
-All functional cards support hot plugging | |
Smart Shelf | -2U high, 19 standard shelf |
-Compact, beautiful, light and good strength design | |
Low Power Consumption | -The power consumption is less than 30 Watt. |
Benefits |
Flexibility, modularity and scalability in configurations |
Build as you grow. Pay for capabilities you require today. Provides improved cash-flow with minimum capital outlay |
Future-proof architecture protecting investment |
Carrier-class redundancy and high network uptime with minimum loss of revenue |
Flexible and cost-effective network solutions |
Creation of differentiated services to enhance the portfolio of service offerings |
Reduction in operational costs and increase in efficiency through lower provisioning time and operator intervention |
Service Boards | |
MST board | provides 4 E1 interfaces (75Ω or 120Ω is optional), performs multiplexing and de-multiplexing of E1, non-blocking time slot cross connection between 896 64Kbps time slots, testing of 48 access channels, and network management function, dual MST boards support backup and hot swap |
PWR board | -48V DC or 220V AC is optional, supports dual power supply |
Audio Service Boards | |
FXO card | provides 8 channels FXO interface |
FXS card | provides 8 channels FXS interface |
4-wire E&M audio card | provides 8 channels 4-wire E/M interface, supports E/M signaling. |
Magneto interface card: | provides 8 channels magneto interface. |
Carrier wave magneto interface card | to connect with a single magneto set or magneto attendant console |
Hotline telephone card | provides 8 hotlines. |
Data Service Boards | |
Co-directional data card | contains 8 channels, conforms to ITU-T G.703 standard |
RS232 data card | contains 8 channels asynchronous RS232 data interface, conforms to ITU-T V.24/V.28 standard |
RS485 data card | contains 8 channels asynchronous RS485 data interfaces, they are full duplex and four wire mode interfaces |
N×64Kbps FV.35 card | contains 1 channel synchronous V.35 data of N×64Kbps data rate, N is from 1 to 3 |
10/100M Ethernet data interface card | providing 4 channel 10/100 Base-T Ethernet bridge, support VLAN |
4E1 interface card | 4 E1 interfaces, 75Ω or 120Ω is optional |
4E1 PDH interface card | access 4 E1s |
Remark: MST and Power board is essential, other audio and data service board is optional. Support maximum 6 pieces of audio and data service boards (exclude MST and PWR board).
Specifications
* Optical Fiber Interface
-Port number: 1-2, support redundant backup
-Bit rate: 150Mbps+/-50ppm
-Wavelength: 1310nm/1550nm
-Optical power:>-9dBm
-Sensitivity:<-38dBm (BER≤1*10-10)
-Distance: 0 - 120Km
-Connector: FC/PC
* E1 Port
-Port number: 4
-Bit rate: 2.048Mbps (50ppm)
-Impedance: 75ohm or 120ohm
-Line Code: HDB3, compliance with ITU-T G.703
-Jitter: compliance with G.823
* Ethernet Port
-Port number: 4, optional
-Speed: 10/100Mbps line speed
-Duplex: Half duplex/Full duplex self adaptation
-Frame Size: 64 - 1536 bytes
-Connector: RJ45
* Environmental Requirements
-Power supply: -48 VDC +-15%
-Fully equipment power consumption: 30W+-10%
-Operating temperature: 0ºC~45ºC
-Humidity: < = 95% (free from condensing)
-Atmospheric pressure: 70~106 Kappa
-Storage temperature: -20ºC ~70 ºC
* Mechanical dimensions
-Dimensions: 482 (L) x 240 (W) x 192 (H) mm
-Weight: 5Kg.